Hello - all of these folders are what is required to build your Postiron.
In each folder, you will find a readme, this will act as a general Key for the naming of the files, as well as a spot where we've added advisories for some parts. This is as simple as informing you if a part will not be seen from the exterior, if a part will be closely intact with a high temperature item such as a motor, or if a part is reccomended to be non-conductive for electrical isolation.
Please note that the folders here are grouped by assembly, and not by reccomended order of assembly. Please be sure to follow the guides provided on our wiki.
ABS or ASA is the recommended filament for most parts, PLA and PETG can be used for many accent pieces.
Each file is named similar to the following;
Part Name - Quantity - Recommended Color - Minimum Material Type - Notes
Bed_Cable_Guide - 1x - Accent - PLA
This is the Bed_Cable_Guide, you need to print One of them, recommended in an accent color, and at the minimum in PLA.
Z_PCB_Spacer - 1x - Any - ABSorASA - Non-Conductive
This is the Z_PCB_Spacer, you need to print One of them, you can use any color, at the minimum in ABS or ASA, and must not be conductive.
Please feel free to join our Discord to help with any feedback. We appreciate any and all feedback that can help us better improve our designs.