¶ Positron Rollout Macro
This is a macro that can be appended to the end of the positron_macro.cfg config file. This macro adds an easy
way to get the Positron ready for travel and has a option menu to unload filament first or simply move all
axes to their fold up positions.
Copy and paste the follow text to the end of positron_macro.cfg file
[gcode_macro Positron_Roll_Out]
description:Display options to get Positron ready to pack up
gcode:
RESPOND TYPE=command MSG="action:prompt_begin Positron abort, not ready yet >>>"
RESPOND TYPE=command MSG="action:prompt_text POSITRON ROLL OUT"
RESPOND TYPE=command MSG="action:prompt_footer_button Unload First|_Unload_and_Go"
RESPOND TYPE=command MSG="action:prompt_footer_button ROLL OUT|_Roll_Out"
RESPOND TYPE=command MSG="action:prompt_show"
[gcode_macro _Roll_Out]
description: moves toolhead and bed to correct positions to be folded
gcode:
M300 P100 ;Button press beep
RESPOND TYPE=command MSG="action:prompt_end"
G28 O ;Home if not homed
G90 ;Set Absolutes
G1 X135 Y70 Z105 F3600 ;Move to fold up park location
M84 ;Disable motors
M118 Positron, Transform and Roll Out!
[gcode_macro _Unload_and_Go]
description: same as rollout but unloads filament, cools down, and then parks to fold
gcode:
M300 P100 ;Button press beep
RESPOND TYPE=command MSG="action:prompt_end"
M118 Unloading filament....
UNLOAD_FILAMENT ;Activate macro unload filament
M118 Cooling Hotend Please Wait....
M106 S255 ;Max fan for cooling
M109 S160 ;Wait until hotend is 160C
M118 Cooling Hotend to 90C.....
M109 S90 ;Wait until hotend is 90C
_Roll_Out ;Move to fold up park location
TURN_OFF_HEATERS ;Nozzle heater off
M106 S0 ;Part fan off
¶ Photos of Macro in Use
¶ From Fluidd web Browser
¶ Touchscreen Photos
